2020

PRICE LIST
Table of Contents

Terms & Conditions - Pages 2, 3, & 4

Reinforced Concrete Pipe, Caps, and Plugs - Page 5
Scribed Holes & Knockouts - Page 5
Reducers & Increasers - Page 5
Concrete Pipe – Approximate Mass & Dimensions - Page 6
PERFECT Pipe – HDPE Lined Concrete Pipe - Page 7
Tees & Wyes - Concrete & PVC Connections - Page 8
Reinforced Concrete Bends - Page 9
Elliptical Reinforced Concrete Pipe - Page 10
Reinforced Concrete Box Units - Page 11
Reinforced Concrete Maintenance Holes - 1200mm to 2400mm - Page 12
Reinforced Concrete Maintenance Holes - 3000mm & 3600mm - Page 13
Reinforced Concrete Maintenance Holes - Appurtenances - Page 13
Reinforced Concrete Maintenance Holes - Grade Rings - Page 13
Maintenance Hole Estimate Sheet - Page 14 & 15
Flexible Connectors - Page 16
Monobox Maintenance Holes - Page 16
Utility Maintenance Holes & Valve Chambers - Page 16
Reinforced Concrete Catch Basins - Page 17
Reinforced Concrete Catch Basins - Appurtenances - Page 17
Reinforced Concrete Catch Basins - Grade Rings - Page 17
Catch Basin Estimate Sheet - Page 18
Concrete Endwalls - Page 19
Concrete Headwalls - Page 19
CON/SPAN Culvert & Bridge Replacement System - Pages 20 & 21
Specialty Precast Notes and Disclaimers - Page 22

2020 Con Cast Pipe Price List - Page 1

Terms & Conditions
General

1. All sales agreements are made between the Purchaser and Con Cast Pipe Inc. ("CCP").

2. All terms and conditions contained herein shall apply to any quotation and/or invoice provided by CCP to the Purchaser.

3. There are no warranties, representations and/or guarantees applicable to goods supplied by CCP to the Purchaser.

4. In the event Purchaser purchases materials from CCP pursuant to this quote or price list (or otherwise) and supplies or incorporates said materials into an
improvement (as defined by applicable provincial construction lien legislation), then Purchaser acknowledges and agrees that the said materials are subject
to a prevenient agreement and that one continuing contract of supply is deemed to be in place.

5. The Purchaser agrees that CCP shall retain title to all goods and/or materials supplied by CCP to Purchaser unless and until the Purchaser has paid for the
goods and/or materials in full. CCP shall have a continuing purchase money security interest in all such goods and their proceeds to secure the performance
by the Purchaser of all its obligations to CCP. The Purchaser waives the right to receive a copy of any financing statement and verification statement and
acknowledges receipt of a copy of this Agreement.

6. The Purchaser hereby authorizes CCP to conduct or cause to be conducted credit investigations/inquiries on Purchaser and any related persons or
companies. The Purchaser hereby authorizes CCP to divulge credit references to other creditors as may be requested with regards to credit established and
history of payments on account, and to use and disclose such information to the furthest extent permitted by law.

7. The Purchaser hereby authorizes CCP to collect, use and disclose credit reports or other information as may be deemed necessary by CCP, on an ongoing
basis, respecting the Purchaser, the principals/officers/directors of the Purchaser, and the signatories on behalf of the Purchaser for the purposes of
extending and administering credit.

8. All quotations, unless previously withdrawn by CCP, are open for acceptance by Purchaser for thirty (30) days from the quotation date, and if not accepted
within that time, shall be deemed to be withdrawn by CCP.

9. All quotations are subject to any increase in sales tax, freight charges, or any new taxes imposed on this transaction which are payable or collectible by
CCP, in which case the amount of such increases will be added to the final invoice.

10. CCP shall not be obliged to supply any goods or materials pursuant to a quotation, whether accepted or not, until such time as CCP has satisfied itself,
within its sole discretion, as to Purchaser's creditworthiness.

11. The Purchaser shall satisfy itself as to the suitability for intended use of any goods or materials supplied by CCP.

12. Waiver of any one or more of the terms and conditions herein by CCP shall not constitute a general waiver of terms and conditions and CCP reserves the
right to enforce any and all conditions not so waived. Any such waiver must be in writing.

13. Acceptance by Purchaser of any quotation provided by CPP shall constitute a valid and binding contract including but not limited to acceptance of all
terms and conditions herein.

14. Severability: In the event that any provision of this agreement is held to be void or unenforceable, all other provisions of this agreement shall remain in
full force and effect and shall in no way be affected, impaired or invalidated.

15. Entire Agreement: This agreement constitutes the entire agreement between Purchaser and CCP and supersedes and extinguishes any and all previous
drafts, agreements, arrangements and/or understandings between them, whether written or oral. This agreement shall enure to the benefit of and be binding
upon the parties hereto, their respective successors, executors, administrators and assigns.

16. Jurisdiction: This agreement shall be governed by and construed under the laws of the Province of Ontario and the proper forum for the resolution of any
claims or disputes arising from or relating to this agreement shall be Ontario, save and except that CCP reserves all of its rights and remedies as may be
provided for under other provincial construction lien legislation.

2020 Con Cast Pipe Price List - Page 2

Terms & Conditions Cont'd

17. Force Majeure: In no event shall CCP be responsible or liable for any failure or delay in the performance of its obligations hereunder arising from or
caused by, directly or indirectly, forces and events beyond its reasonable control, including, without limiting the generality of the foregoing, strikes, work
stoppages, shortages of labour and/or materials, accidents, acts of war and/or terrorism, civil and/or military disturbances, acts of theft and/or other crimes,
acts of God, fires, floods, earthquakes and adverse weather events.

Payment

18. All invoices rendered by CCP to Purchaser shall be paid in accordance with payment terms as set out herein. Any invoice not paid within the terms as
set out herein shall be deemed to be an "overdue invoice".

19. All invoices and statements of account rendered by CCP to Purchaser shall be considered correct if no objections are reported in writing by the
Purchaser within 30 days of the date of the invoice or statementaccount, as applicable.

20. Interest at the rate of 2% per month, equivalent to 26.8% per annum, shall be charged by CCP to the Purchaser on any and all overdue invoices.

21. In the event it becomes necessary for CCP to pursue legal proceedings against Purchaser to collect any unpaid balances or other sums due and owing
by Purchaser to CCP, interest at the rate of 2% per month, equivalent to 26.8% per annum, shall apply as pre- and post-Judgment interest with respect to
any Judgment obtained by CCP against Purchaser, including any amounts awarded to CCP for legal costs and disbursements.

22. In the event it becomes necessary for CCP to pursue legal proceedings against Purchaser to collect any unpaid balances or other sums due and owing
by Purchaser to CPP, or otherwise to protect and/or enforce CCP's rights under this agreement, Purchaser shall be liable to pay all legal and related costs
and disbursements incurred by CCP on a full indemnity scale.

Return Policy

23. CCP retains the sole, unfettered and absolute discretion to accept or refuse return of any product or materials supplied to Purchaser. Permission must
be obtained prior to any return being accepted. For further clarity, all sales are considered final, except at CCP's sole discretion.

24. Returns will not be accepted on any altered or damaged products.

25. Special Precast Concrete Products: In the event that special precast concrete products (including but not limited to fittings pipe, radius pipe, pipe with
holes, scribed/cored manholes, rectangular chambers, box units, specialty precast, etc.) are ordered by Purchaser from CCP, Purchaser shall not be entitled
to cancel such orders once placed. In the event that Purchaser seeks to return any such special precast concrete products, and in the further event that
CCP is prepared at its sole discretion to accept return of such products, Purchaser shall not be entitled to any credit or refund for same unless and until such
products are resold by CCP. Any such credit or refund shall be limited to the amounts obtained by CCP on resale, less applicable restocking charges as set
out herein.

26. In the event CCP is prepared to accept the return of materials, then CCP's shipping department must be contacted a minimum of 3 days prior to the
proposed return. The shipping department can be contacted at 1-800-668-7473. CCP requires an accurate list of materials proposed to be returned,
including but not limited to quantity, size and/or length, class and description of materials.

27. Re-Stocking Fees: A handling charge equivalent to 25% of the purchase price of the materials accepted for return shall be deducted from any amounts
to be credited.

Freight and Freight Charges

28. All prices quoted herein by CCP include the delivery cost for a freight on board ("FOB") truck to the Purchaser's designated delivery sites, provided the
designated delivery sites are located within 250 kilometres of CCP's Guelph or Oakville facilities. Any deliveries to destinations in excess of 250 kilometres
from CCP's Guelph or Oakville facilities are subject to additional delivery charges.

29. A delivery less than the minimum truckload quantity is priced F.O.B. from our plant. CCP reserves the right to charge an additional amount for deliveries
of less than the 20,000 kg minimum truckload quantities, other than the final load to complete a specific order. Contractor will be charged additional fees
associated with deliveries requiring the use of the Stake or Straight trucks that are less than the minimum truckload quantity of 20,000 kg pending any
extraneous circumstance(s).

2020 Con Cast Pipe Price List - Page 3

Terms & Conditions Cont'd

30. Exclusion of Liability: CCP shall not be liable for any delay or non-delivery arising from or caused by, directly or indirectly, forces and events beyond its
reasonable control, including, without limiting the generality of the foregoing, strikes, work stoppages, shortages of labour and/or materials, accidents, acts of
war and/or terrorism, civil and/or military disturbances, acts of theft and/or other crimes, acts of God, fires, floods, earthquakes and adverse weather events.

31. Delivery shall be made as close to the jobsite, designated storage area or line of trench as is practical for loaded trucks and trailers operating under their
own power, without risk of accident, injury or undue delay. The Purchaser shall provide and maintain suitable access roads to the project site for delivery of
product.

32. Loads that have been released for shipment through CCP’s Shipping Department, that are not cancelled through direct contact with our Shipping
Department, or have not used the shipping phone line (load cancellation extension) before 5:00am on the specified day of delivery, and arrive on site are the
responsibility of the Purchaser to off-load. If a delivered load of product is returned to CCP from site, the purchaser is subject to a $500.00 charge for return
and handling of such returned materials. Furthermore, if product is delivered to the site and the purchaser does not have safe and capable means to off-load
product which results in the load being returned to CCP, the Purchaser will be charged a $500.00 fee for return of product to CCP. Please contact your sales
representative for further clarification, if required.

33. CCP shall be entitled to charge the Purchaser for unreasonable delay in unloading or releasing of its delivery vehicles. All deliveries allow for a one (1)
hour maximum of delivery vehicle time on site for off-loading. If there is any additional time on site, CCP reserves the right to charge the customer for
additional time spent on site during offloading and to hold the release of any subsequent trucks until all trucks are off-loaded and released from site.

34. Quotations for precast products are based on deliveries being made in normal working hours and subject to load restrictions. Weekend or night
deliveries will be subject to additional delivery charges.

35. The Purchaser shall give CCP three (3) business days notice of delivery requests.

36. Unless otherwise specified, all quotations are made on the conditions that full delivery will be taken within six (6) months from acceptance of order. Any
product delivered after this period may be subject to increase in price as shown on CCP’s then current price list. Con Cast Pipe reseves the right to invoice a
customer for product that has been made specific and special for a project if it has not been delivered to site within six (6) months from the date of the receipt
of the order.

37. The Purchaser will inspect the products at the time of delivery and any claims in respect thereto shall be made at that time. If any such products are
found to be defective, CCP will deliver replacement product to the Purchaser at the site of the work. CCP’s liability for defective products is limited to the
replacement of same product at CCP’s cost. CCP waives all responsibility of any deficient product not reported immediately after the delivery.

Sales Tax

38. HST (Harmonized Sales Tax) is EXTRA.

Terms

39. Net thirty (30) days from the date of the invoice, or, a three (3) percent Prompt Payment Discount, the 25th of the month following may be applicable
providing the account is in good standing and has a payment history to support such an initiative. Taxes are not subject to the Prompt Payment Discount.

40. There will be a 3% discount for precast orders picked up at our Guelph or Oakville yard. If a transfer is required to have product picked up at a certain
location, the purchaser will be charged for the freight costs of the transferred product.

2020 Con Cast Pipe Price List - Page 4

Reinforced Concrete Pipe, Caps, and Plugs
SIZE UNIT MASS CLASS 50-D CLASS 65-D CLASS 100-D CLASS 140-D Caps and Plugs
(mm) (kg/m) $ /metre $ /metre $ /metre $ /metre $ /ea.
300 225 95.10 95.10 95.10 95.10 95.10
375 306 117.20 117.20 117.20 117.20 117.20
450 381 120.80 120.80 120.80 151.00 151.00
Reinforced
525
Concrete
470
Pipe, Caps,
131.70
and Plugs131.70 153.80 181.70 181.70
SIZE
600 UNIT578
MASS CLASS 50-D
177.30 CLASS 65-D
177.30 CLASS 100-D
203.70 CLASS 140-D
239.60 Caps and Plugs
239.60
(mm)
675 (kg/m)
691 $ 271.80
/metre $ 271.80
/metre $ 309.50
/metre $ 362.50
/metre $ /ea.
362.50
300
750 225
780 95.10
358.20 95.10
358.20 95.10
409.50 95.10
478.70 95.10
478.70
375
825 306
912 117.20
415.60 117.20
415.60 117.20
528.60 117.20
555.30 117.20
555.30
450
900 381
1039 120.80
498.60 120.80
498.60 120.80
570.40 151.00
665.90 151.00
665.90
525
975 470
1195 131.70
547.00 131.70
575.90 153.80
655.40 181.70
767.00 181.70
767.00
600
1050 578
1277 177.30
626.50 177.30
657.90 203.70
753.40 239.60
877.60 239.60
877.60
675
1200 691
1561 271.80
785.20 271.80
824.80 309.50
943.70 362.50
1,099.50 362.50
1,099.50
750
1350 780
1939 358.20
1,009.80 358.20
1,060.30 409.50
1,212.90 478.70
1,412.60 478.70
1,412.60
825
1500 912
2123 415.60
1,235.20 415.60
1,296.30 528.60
1,482.10 555.30
1,729.10 555.30
1,729.10
900
1650 1039
2500 498.60
1,479.10 498.60
1,554.20 570.40
1,776.40 665.90
2,071.10 665.90
2,071.10
975
1800 1195
2865 547.00
1,787.30 575.90
1,879.20 655.40
2,145.40 767.00
2,503.40 767.00
2,503.40
1050
1950 1277
3324 626.50
2,072.80 657.90
2,178.90 753.40
2,486.90 877.60
2,903.10 877.60
2,903.10
1200
2100 1561
3807 785.20
2,378.60 824.80
2,495.00 943.70
2,853.50 1,099.50
3,328.10 1,099.50
3,328.10
1350
2250 1939
4311 1,009.80
2,703.10 1,060.30
2,839.50 1,212.90
3,244.30 1,412.60
3,785.40 1,412.60
3,785.40
1500
2400 2123
4869 1,235.20
3,164.00 1,296.30
3,319.20 1,482.10
3,794.00 1,729.10
4,426.80 1,729.10
4,426.80
1650
2550 2500
5179 1,479.10
3,563.40 1,554.20
3,738.50 1,776.40
4,274.20 2,071.10
4,987.30 2,071.10
4,987.30
1800
2700 2865
5752 1,787.30
3,954.80 1,879.20
4,152.10 2,145.40
4,745.80 2,503.40
5,536.90 2,503.40
5,536.90
1950
3000 3324
7043 2,072.80
4,843.00 2,178.90
5,087.50 2,486.90
5,814.50 2,903.10
6,783.10 2,903.10
6,783.10
2100 3807 2,378.60 2,495.00 2,853.50 3,328.10 3,328.10
GASKETS
2250 INCLUDED IN PRICE.
4311 2,703.10 2,839.50 3,244.30 3,785.40 3,785.40
ABOVE PRICES ARE PER
2400 4869METRE. 3,164.00 3,319.20 3,794.00 4,426.80 4,426.80
PLEASE
2550CONTACT OUR SALES DEPARTMENT
5179 FOR MICROTUNNELING
3,563.40 3,738.50 AND JACKING4,274.20
PIPE PRICES. 4,987.30 4,987.30
2700 5752 3,954.80 4,152.10 4,745.80 5,536.90 5,536.90
Scribed
3000 Holes & Knockouts4,843.00
7043 5,087.50 5,814.50 6,783.10 6,783.10
MAINLINE PIPE SIZE
GASKETS INCLUDED IN PRICE.
Price Per Hole
ABOVE PRICES ARE PER METRE. $ /each
Up to 1350OUR
PLEASE CONTACT mm SALES DEPARTMENT
116.50FOR MICROTUNNELING AND JACKING PIPE PRICES.
1500mm and over 232.80

Scribed Holes & Knockouts

MAINLINE PIPE SIZE
Reducers & Increasers Price Per Hole
$ /each
PRICE PER PIECE
Up to 1350 mm 116.50
1) 300mm to 3000mm
1500mm reinforced pipe REDUCER
and over 232.80or INCREASER
- multiply the price per metre of the larger pipe x 6.5.

Reducers & Increasers

PRICE PER PIECE
1) 300mm to 3000mm reinforced pipe REDUCER or INCREASER
- multiply the price per metre of the larger pipe x 6.5.

2020 Con Cast Pipe Price List - Page 5

2020 Con Cast Pipe Price List - Page 5

Concrete Pipe
Approximate Mass & Dimensions
MASS PER
INSIDE DIA. OUTSIDE DIA. WALL THICKNESS LAY LENGTH PIECE TRUCKLOAD LOTS
(mm) (mm) (mm) (m) (kg) (pcs)*
300 444.5 69.9 2.44 550 74
375 533.4 76.2 2.44 746 54
450 622.3 82.6 2.44 930 44
525 711.2 88.9 2.44 1140 35
600 800.1 95.3 2.44 1410 29
675 889.0 101.6 2.44 1680 24
750 977.9 108.0 2.44 1905 21
825 1066.8 114.3 2.44 2225 18
900 1155.7 120.7 2.44 2535 16
975 1244.6 127.0 2.44 2915 14
1050 1333.5 133.4 2.44 3115 13
1200 1511.3 146.1 2.44 3810 10
1350 1689.1 158.8 2.44 4731 8
1500 1828.8 152.4 2.44 5180 7
1650 2006.6 165.1 2.44 6101 6
1800 2184.4 177.8 2.44 6991 5
1950 2362.2 190.5 2.44 8110 5
2100 2540.0 203.2 2.44 9290 4
2250 2717.8 215.9 2.44 10520 3
2400 2895.6 228.6 2.44 11880 2
2550 3073.4 241.3 2.44 12637 2
2700 3251.2 254.0 2.44 14035 2
3000 3606.8 279.4 2.44 17185 1
NOTES:
1) *SPRING HALF LOAD SEASON WILL AFFECT GROSS WEIGHT.

2020 Con Cast Pipe Price List - Page 6

The pipe that will
revolutionize the landscape
of infrastructure systems
is here, and it’s PERFECT.

Con Cast Pipe is the first precast and concrete pipe manufacturer in Canada to exclusively offer
the PERFECT PIPE system. With PERFECT PIPE, enjoy increased peace-of-mind when committing
to a long-lasting pipe product backed by the dependability of the Con Cast Pipe brand.

Next Level Of Chemical Resistance 6

Joint Integrity at its best 6
PERFECT PIPE is manufactured in various diameters that
are 100% protected with a high-density The PERFECT PIPE joint system can
polyethylene (HDPE) liner. The HDPE liner withstand a constant internal pressure of 36
protects the interior concrete surface from the psi through the combination of a dual jointing
damaging effects associated with corrosive system that seals the HDPE liner inside the
gases and liquids that can form in the sanitary joint of the concrete
sewer system. pipe. PERFECT PIPE
improves upon
existing field-welded
joint technology by
using a thermoplastic
internal connector
with dual elastomeric
rubber gaskets to join the pipe sections;
therefore no field welding is required.

Effective Microtunneling 6
PERFECT MICROTUNNELING PIPE allows the designer the choice to construct the sewer system
with or without the HDPE liner The combination of the HDPE liner and the new improved joint
performance inherent in the thermoplastic joint connector means the pipe can be installed without
field welding reducing construction disturbance and installation times.

concastpipe.com | 1 800 668 PIPE | [email protected]

Tees & Wyes: Concrete or PVC Connections
To calculate the price of a TEE or WYE junction, multiply the price per metre of the main
pipe by its length and add the corresponding price for the required branch as listed below.
(Price includes rubber gasket)
MAIN PIPE SIZE

BRANCH SIZE 300-525 600-825 900-1200 1350-1800 1950-2400 2550-3000 & Boxes
(mm) $ /ea $ /ea $/ea $/ea $/ea $/ea
100 154.30 162.20 206.80 280.60 336.10 389.20
125 169.50 177.60 227.10 307.50 369.00 426.60
150 186.70 196.40 250.20 339.30 406.50 470.80
200 249.10 261.80 333.80 452.50 542.60 627.60
250 279.20 292.70 373.60 506.60 607.60 702.70
300 379.90 538.10 698.10 989.20 1,280.30 1,745.50
375 459.50 615.40 828.70 1,160.90 1,527.50 1,879.10
450 561.90 695.70 911.20 1,243.40 1,610.20 1,961.40
525 606.80 717.40 934.00 1,266.20 1,632.50 1,983.90
600 897.60 1,119.10 1,451.40 1,817.60 2,169.30
675 1,277.70 1,449.30 1,782.00 2,148.30 2,499.80
750 1,650.10 1,799.10 2,131.20 2,497.90 2,849.00
825 1,887.60 2,013.40 2,346.20 2,712.70 3,064.00
900 2,341.60 2,674.10 3,040.30 3,391.40
975 2,666.10 2,971.20 3,338.10 3,689.40
1050 3,028.00 3,302.90 3,669.00 4,020.40
1200 3,736.40 3,965.60 4,332.50 4,683.60
1350 4,945.00 5,283.20 5,698.90
NOTES:
1) Maintenance Hole Tee - Calculate the same as above.
2) Largest available MAINTENANCE HOLE TEE is 3000mm x 1200mm.
3) Smallest available MAINTENANCE HOLE TEE is 1050mm x 1200mm.
4) Please contact our Sales Department for Tee & Wye branch sizes that are larger than 1350mm diameter.
5) Please contact our Sales Department for Tees & Wyes pipe sections that have multiple branch pipe.

2020 Con Cast Pipe Price List - Page 8

Reinforced Concrete Bends
Reinforced Concrete
ONE-QUARTER (90 O Bends
) & ONE-EIGHTH (45O) BENDS, BELOW PRICES ARE PER PIECE
ONE-QUARTER
SIZE (90OCLASS
) & ONE-EIGHTH
50-D (45O) BENDS,
CLASS 65-DBELOW PRICESCLASS
ARE PER PIECE
100-D CLASS 140-D
SIZE CLASS 50-D CLASS 65-D CLASS 100-D CLASS 140-D
(mm) $ /ea $ /ea $ /ea $ /ea MAX. ANGLE
(mm)
300 $512.00
/ea $512.00
/ea $512.00
/ea $512.00
/ea MAX. ANGLE
90O
OO
300375 512.00
634.00 512.00
634.00 512.00
634.00 512.00
634.00 9090
OO
375
450 634.00
653.30 634.00
653.30 634.00
653.30 634.00
816.30 9090
OO
450
525 653.30
711.60 653.30
711.60 653.30
832.10 816.30
980.00 9090
OO
525
600 711.60
904.50 711.60
904.50 832.10
1,038.70 980.00
1,222.10 9090
OO
600
675 904.50
1,359.70 904.50
1,359.70 1,038.70
1,548.30 1,222.10
1,812.70 9090
OO
675
750 1,359.70
1,792.20 1,359.70
1,792.20 1,548.30
2,048.90 1,812.70
2,393.70 9090
OO
750
825 1,792.20
2,078.00 1,792.20
2,078.00 2,048.90
2,642.70 2,393.70
2,777.70 9090
OO
825
900 2,078.00
2,491.20 2,078.00
2,491.20 2,642.70
2,850.40 2,777.70
3,327.00 9090
OO
900
975 2,491.20
2,735.70 2,491.20
2,880.90 2,850.40
3,277.20 3,327.00
3,833.20 9090
OO
975
1050 2,735.70
3,132.40 2,880.90
3,290.30 3,277.20
3,766.60 3,833.20
4,388.30 9090
OO
1050
1200 3,132.40
3,925.00 3,290.30
4,124.00 3,766.60
4,718.40 4,388.30
5,499.50 9090
OO
1200
1350 3,925.00
5,051.10 4,124.00
5,301.10 4,718.40
6,064.60 5,499.50
7,063.30 9090
OO
1350
1500 5,051.10
6,175.10 5,301.10
6,480.20 6,064.60
7,410.30 7,063.30
8,645.00 9090
OO
1500
1650 6,175.10
7,396.60 6,480.20
7,771.10 7,410.30
8,880.90 8,645.00
10,351.70 9075
OO
1650
1800 7,396.60
8,936.40 7,771.10
9,394.70 8,880.90
10,727.20 10,351.70
12,516.70 7570
OO
1800
1950 8,936.40
10,365.30 9,394.70
10,893.20 10,727.20
12,433.70 12,516.70
14,515.20 7065
OO
1950
2100 10,365.30
11,892.60 10,893.20
12,475.30 12,433.70
14,266.40 14,515.20
16,638.30 6562
OO
2100
2250 11,892.60
13,516.50 12,475.30
14,196.00 14,266.40
16,221.30 16,638.30
18,928.00 6260
OO
2250
2400 13,516.50
15,819.50 14,196.00
16,596.80 16,221.30
18,969.30 18,928.00
22,133.70 6056
OO
2400
2550 15,819.50
17,817.40 16,596.80
18,691.90 18,969.30
21,370.10 22,133.70
24,936.70 5653
OO
2550
2700 17,817.40
19,774.50 18,691.90
20,759.90 21,370.10
23,729.70 24,936.70
27,684.00 5350
OO
2700
3000 19,774.50
24,214.80 20,759.90
25,436.40 23,729.70
29,072.20 27,684.00
33,914.60 5045
3000 PRICES ARE
ABOVE 24,214.80
PER PIECE. 25,436.40 29,072.20 33,914.60 45O
ABOVE PRICES ARE PER PIECE.

2020 Con Cast Pipe Price List - Page 9

2020 Con Cast Pipe Price List - Page 9
Elliptical Reinforced Concrete Pipe
EQUIV. DIA. RISE x SPAN HE I HE II HE III HE IV MASS
(mm) (mm) $ /metre $ /metre $ /metre $ /metre (kg/m)
900 735 x 1145 722.60 763.10 847.20 971.90 931
1050 865 x 1345 884.60 925.40 1,043.40 1,196.10 1214
1200 965 x 1525 1,087.00 1,136.60 1,277.00 Available Upon Request 1490
1350 1090 x 1725 1,364.30 1,436.20 1,610.70 Available Upon Request 1840
1500 1220 x 1930 1,626.30 1,710.50 1,925.20 Available Upon Request 2198
1650 1345 x 2110 1,928.40 2,028.00 2,273.90 Available Upon Request 2600
1800 1475 x 2310 2,320.80 2,433.00 2,731.60 Available Upon Request 3040
1950 1600 x 2490 2,666.40 2,806.90 3,146.40 Available Upon Request 3502
2100 1725 x 2690 3,040.40 3,199.30 3,588.60 Available Upon Request 3993
NOTES:
1) Above prices includes jointing material.
2) BENDS - multiply the price per metre of the horizontal elliptical pipe x 5.0.
3) REDUCERS & INCREASERS - multiply the price per metre of the larger horizontal elliptical pipe x 6.0.
4) PLUGS & CAPS - multiply the price per metre of the HE IV horizontal elliptical pipe x 1.0.
5) MAINTENANCE HOLE TEE - multiply the price per metre of the elliptical pipe x 2.44 and add $4,472.50 for the
1200mm riser stub.
6) Please allow 3 to 4 weeks delivery.

. 2020 Con Cast Pipe Price List - Page 10

Reinforced Concrete Box Units - OPSS 1821
SPAN x RISE WALL THICKNESS WATERWAY AREA APPROX. MASS Design Earth Cover OPSS 1821
(mm) (mm) (m2) (kg/m) (m) ($ /metre)
1800 x 900 200 1.61 3380 0.6 to 5.5 2,043.40
1800 x 1200 200 2.16 3690 0.6 to 5.5 2,230.40
2400 x 1200 200 2.89 4560 0.6 to 3.6 2,846.00
2400 x 1500 200 3.63 4870 0.6 to 3.6 3,048.90
2400 x 1800 200 4.38 5170 0.6 to 3.6 3,252.60
3000 x 1500 250 4.51 6860 0.6 to 3.6 4,452.80
3000 x 1800 250 5.44 7250 0.6 to 3.6 4,708.10
3000 x 2100 250 6.37 7630 0.6 to 3.6 4,961.20
3000 x 2400 250 7.30 8020 0.6 to 3.6 5,213.60

Reinforced Concrete Box Units - CHBDC CAN/CSA S6-06

SPAN x RISE WALL THICKNESS WATERWAY AREA APPROX. MASS Design Earth Cover CHBDC CAN/CSA S6-06
(mm) (mm) (m2) (kg/m) (m) ($ /metre)
1800 x 900 200 1.61 3380 0.0 to 0.6 & 5.5 to 8.0 2,571.40
1800 x 1200 200 2.16 3690 0.0 to 0.6 & 5.5 to 8.0 2,797.50
2400 x 1200 200 2.89 4560 0.0 to 0.6 & 3.6 to 6.0 3,577.60
2400 x 1500 200 3.63 4870 0.0 to 0.6 & 3.6 to 5.0 3,862.90
2400 x 1800 200 4.38 5170 0.0 to 0.6 & 3.6 to 5.0 4,070.80
3000 x 1500 250 4.51 6860 0.0 to 0.6 & 3.6 to 5.0 5,476.10
3000 x 1800 250 5.44 7250 0.0 to 0.6 & 3.6 to 5.0 5,705.70
3000 x 2100 250 6.37 7630 0.0 to 0.6 & 3.6 to 5.0 6,003.10
3000 x 2400 250 7.30 8020 0.0 to 0.6 & 3.6 to 5.0 6,303.60
NOTES:
1) BOX LAY LENGTH - 2.44 m.
2) JOINTING MATERIAL - Add 5% to above price per metre.
3) DELIVERY - Please contact the Con Cast Pipe Sales Department for delivery dates.
4) SPECIALS - Please contact our Sales or Engineering Departments for prices of special design box units.
5) REINFORCED CONCRETE BOX UNIT TEE & WYE JUNCTIONS -
Box to Box Junction - multiply the price per metre of the larger box unit by 6.0.
Box to Pipe Junction - multiply the price per metre of the box unit by 2.5 and add the branch price from page 6.
6) REINFORCED CONCRETE BOX UNIT BENDS & ELBOWS -
5.0 x price per metre of the larger box = Total price per piece of BEND or ELBOW.
7) REINFORCED CONCRETE BOX UNIT REDUCERS & INCREASERS -
6.0 x price per metre of the larger box = Total price per piece of REDUCER or INCREASER.
8) REINFORCED CONCRETE BOX UNIT PLUGS & CAPS -
Price per metre of box unit = Total price per piece of PLUG or CAP.
9) REINFORCED CONCRETE RADIUS BOX UNIT - 1.15 x price per metre of straight box
10) SKEWED END - 1.2 x price per metre of straight box and multiply length of skewed unit.
11) FLUSH ENDS - $798.40 per unit.
12) STANDARD 15M DOWELS & INSERTS - $92.50 per set.
13) SCRIBED HOLES - $232.80 each.
14) 685mm ACCESS OPENING IN TOP SLAB - $1,330.60 (includes steps).
15) 1200mm MANHOLE TEE - $4,917.80 (includes steps).
16) Additional sizes available upon request. Please contact our Sales Department for special box size pricing and
depths greater than listed above.

2020 Con Cast Pipe Price List - Page 11

1200mm Reinforced Concrete Maintenance Holes
SIZE HEIGHT APPROX. PRICE
DESCRIPTION
(mm) (m) MASS $
1200mm Reinforced
1200 Concrete
taper top c/w steps Maintenance Holes
1.320 1905 kg/pc 1,086.40 ea.
SIZE
1200 flat cap HEIGHT
0.305 APPROX.
715 kg/pc PRICE
619.00 ea.
DESCRIPTION
1200
(mm) riser c/w steps 0.305
(m)to 1.829 MASS
1324 kg/m 791.70
$ /m
1200
1200 monolithic
taper top c/wbase
stepsc/w steps 0.762
1.320 1760
1905 kg/pc
kg/pc 1,308.10 ea.ea.
1,086.40
1200
1200 flatmonolithic
cap base c/w steps 0.914
0.305 1960
715 kg/pc
kg/pc 1,428.50 ea.ea.
619.00
1200
1200 monolithic
riser base c/w steps
c/w steps 1.067
0.305 to 1.829 2160 kg/pc
1324 kg/m 1,549.50 /mea.
791.70
1200
1200 monolithic
monolithic basebase c/w
c/w steps
steps 1.219
0.762 2360 kg/pc
1760 kg/pc 1,669.80 ea.ea.
1,308.10
1200
1200 monolithic base c/w
monolithic base c/w stepssteps 1.372
0.914 2550 kg/pc
1960 kg/pc 1,789.40 ea.ea.
1,428.50
1200
1200 monolithic base c/w
monolithic base c/w stepssteps 1.524
1.067 2750 kg/pc
2160 kg/pc 1,909.90 ea.ea.
1,549.50
1200
1200 base slab
monolithic base c/w steps 0.203
1.219 780 kg/pc
2360 kg/pc 619.00 ea.ea.
1,669.80
1200
1200 safety grate
monolithic basesupplied & installed
c/w steps 1.372 2550 kg/pc 1,483.50 ea.ea.
1,789.40
1200
1200 prebenching
monolithic base c/w steps 1.524 2750 kg/pc 713.70 ea.ea.
1,909.90
1200 base slab 0.203 780 kg/pc 619.00 ea.
1500mm
1200 Reinforced
safety grateConcrete Maintenance Holes
supplied & installed 1,483.50 ea.
1200
SIZE prebenching HEIGHT APPROX. 713.70 ea.
PRICE
DESCRIPTION
(mm) (m) MASS $
1500mm Reinforced
1500 flat capConcrete Maintenance Holes
0.430 1810 kg/pc 1,233.40 ea.
SIZE
1500 to 1200 transition c/w steps HEIGHT
0.610 APPROX.
1678 kg/pc PRICE ea.
1,233.40
1500 DESCRIPTION
riser c/w steps 3.05 to 2.438 1927 kg/m 1,200.00 /m
(mm) (m) MASS $
1500
1500 flatmonolithic
cap base c/w steps 1.067
0.430 3430
1810 kg/pc
kg/pc 2,877.40 ea.ea.
1,233.40
1500
1500 to 1200 monolithic
transition c/wbase
stepsc/w steps 1.372
0.610 4040
1678 kg/pc
kg/pc 3,243.30 ea.ea.
1,233.40
1500 monolithic base c/w steps 1.676 4645 kg/pc 3,608.10 ea.
1500 riser c/w steps 3.05 to 2.438 1927 kg/m 1,200.00 /m
1500 monolithic base c/w steps 1.829 5050 kg/pc 3,791.70 ea.
1500 monolithic base c/w steps 1.067 3430 kg/pc 2,877.40 ea.
1500 monolithic base c/w steps 1.981 5350 kg/pc 3,974.20 ea.
1500 monolithic base c/w steps 1.372 4040 kg/pc 3,243.30 ea.
1500 base slab 0.305 1770 kg/pc 1,233.40 ea.
1500 monolithic base c/w steps 1.676 4645 kg/pc 3,608.10 ea.
1500 safety grate supplied & installed 2,088.80 ea.
1500 monolithic base c/w steps 1.829 5050 kg/pc 3,791.70 ea.
1500
1500 prebenching
monolithic base c/w steps 1.981 5350 kg/pc 960.40 ea.ea.
3,974.20
1500 base slab 0.305 1770 kg/pc 1,233.40 ea.
1800mm
1500 Reinforced
safety grateConcrete Maintenance Holes
supplied & installed 2,088.80 ea.
1500
SIZE prebenching HEIGHT APPROX. 960.40 ea.
PRICE
DESCRIPTION
(mm) (m) MASS $
1800mm Reinforced
1800 flat capConcrete Maintenance Holes
0.430 2720 kg/pc 1,663.30 ea.
SIZE
1800 to 1200 transition c/w steps HEIGHT
0.610 APPROX.
2400 kg/pc PRICE ea.
1,663.30
1800 DESCRIPTION
riser c/w steps 0.610
(mm) (m)to 2.438 2756 kg/m
MASS 1,706.30
$ /m
1800
1800 flatbase
cap slab 0.305
0.430 2630
2720 kg/pc
kg/pc 1,663.30 ea.ea.
1,663.30
1800
1800 to 1200 safety grate
transition supplied & installed
c/w steps 0.610 2400 kg/pc 2,710.40 ea.ea.
1,663.30
1800 riser c/w steps 0.610 to 2.438 2756 kg/m 1,706.30 /m
2400mm
1800 Reinforced
base slab Concrete Maintenance0.305 Holes 2630 kg/pc 1,663.30 ea.
1800
SIZE safety grate supplied & installed HEIGHT APPROX. 2,710.40 ea.
PRICE
DESCRIPTION
(mm) (m) MASS $
2400mm Reinforced
2400 flat capConcrete Maintenance Holes
0.430 4980 kg/pc 3,296.00 ea.
SIZE
2400 to 1200 transition slab c/w steps HEIGHT
0.430 APPROX.
4210 kg/pc PRICE ea.
3,296.00
2400 DESCRIPTION
riser c/w steps 0.610
(mm) (m)to 2.438 4598 kg/m
MASS 3,042.00
$ /m
2400
2400 flatbase
cap slab 0.305
0.430 4620
4980 kg/pc
kg/pc 3,296.00 ea.ea.
3,296.00
2400
2400 to 1200 safety grate
transition supplied
slab c/w steps& installed 0.430 4210 kg/pc 4,238.30 ea.ea.
3,296.00
2400 riser c/w steps 0.610 to 2.438 4598 kg/m 3,042.00 /m
2400 base slab 0.305 4620 kg/pc 3,296.00 ea.
2400 safety grate supplied & installed 4,238.30 ea.

2020 Con Cast Pipe Price List - Page 12

3000mm Reinforced Concrete Maintenance Holes
SIZE HEIGHT APPROX. PRICE
DESCRIPTION
3000mm
(mm) Reinforced Concrete Maintenance (m)
Holes MASS $
3000
SIZE flat cap 0.450
HEIGHT 7847 kg/pc
APPROX. 5,550.70
PRICE ea.
3000 to 1200 DESCRIPTION
transition slab c/w steps 0.450 7258 kg/pc 5,550.70 ea.
(mm)
3000 riser c/w steps
(m)
0.610 to 2.438
MASS
7043 kg/m
$
4,758.90 /m
3000
3000 flat cap
base slab 0.450
0.305 7847 kg/pc
8225 kg/pc 5,550.70
5,550.70 ea. ea.
3000
3000to 1200 transition
safety grateslab c/w steps
supplied & installed 0.450 7258 kg/pc 5,550.70
on request ea.
3000 riser c/w steps 0.610 to 2.438 7043 kg/m 4,758.90 /m
3000 base slab 0.305 8225 kg/pc 5,550.70 ea.
3600mm 3000
Reinforced Concrete Maintenance Holes
safety grate supplied & installed on request
SIZE HEIGHT APPROX. PRICE
DESCRIPTION
3600mm Reinforced Concrete Maintenance (m)
(mm) Holes MASS $
3600 flat cap 0.450 10500 kg/pc 9,801.60 ea.
3600SIZE
to 1200 DESCRIPTION
transition slab c/w steps HEIGHT
0.450 APPROX.
10500 kg/pc PRICE
9,801.60 ea.
(mm)
3600 riser c/w steps (m)
0.610 to 1.829 MASS
11042 kg/m 10,371.30$ /m
3600
3600 flat cap
base slab 0.450
0.305 10500kg/pc
10500 kg/pc 9,801.60 ea.
9,801.60 ea.
3600
3600to 1200 transition
safety grateslab c/w steps
supplied & installed 0.450 10500 kg/pc 9,801.60
on request ea.
3600 riser c/w steps 0.610 to 1.829 11042 kg/m 10,371.30 /m
3600 base slab 0.305 10500 kg/pc 9,801.60 ea.
IMPORTANT: 2400mm, 3000mm, and 3600mm MAINTENANCE HOLES TO BE OFF-LOADED BY CONTRACTOR.
3600 safety grate supplied & installed on request
NOTES:
1)IMPORTANT:
Gaskets included 2400mm, 3000mm, and 3600mm MAINTENANCE HOLES TO BE OFF-LOADED BY CONTRACTOR.
in price.
2) Prices on product manufactured to OPSD 700 series and OPSD 1000 series.
3)NOTES:
Install outlet pipe in centre of precast outlet opening.
4)1)Standard
Gaskets stepsincluded in price.
conform to OPSD 405.010. Solid aluminum steps available upon request.
5)2)Please
Pricescontact
on product manufactured
our sales department to OPSD 700 on
for pricing series and OPSD
precast 1000 series.
drop structures.
3) Install outlet pipe in centre of precast outlet opening.
4) Standard steps conform to OPSD 405.010. Solid aluminum steps available upon request.
Maintenance Hole Appurtenances
5) Please contact our sales department for pricing on precast drop structures.
PRICE
DESCRIPTION
$
Maintenance
maintenance hole safety Hole
steps Appurtenances
OPSD 405.010 28.00 ea
solid aluminum steps OPSD 405.020 PRICE
40.50 ea
DESCRIPTION
outside rebar steps - supplied & installed fo C.I.P. drop structures 37.40$ ea
maintenancehole
maintenance holeclean
safety outsteps
stepsOPSD 405.010
- supplied & installed 28.00 ea
41.40 ea
solid aluminum
maintenance holesteps
frames OPSD 405.020
& covers OPSD 401.010 40.50 ea
691.70 ea
outside rebar steps - supplied &
hatches cast into flat caps (hatch by others) installed fo C.I.P. drop structures 37.40
635.90 ea ea
maintenance hole clean out
swift lift lifting eyes (4 tonne capacity)steps - supplied & installed 41.40
428.60 ea ea
maintenance
swift hole (8
lift lifting eyes frames
tonne&capacity)
covers OPSD 401.010 691.70 ea
806.60 ea
hatches cast
engineering into flat caps
surcharge (hatch by engineering
(non-standard others) requirements) 635.90 ea
1,013.40 ea
swift lift lifting eyes (4 tonne capacity) 428.60 ea
swift lift lifting eyes (8 tonne capacity) 806.60 ea
Maintenance Grade Rings
engineering surcharge (non-standard engineering requirements) 1,013.40 ea
50mm maintenance hole grade ring - 12 per bundle - 52 kg ea. 47.90 ea
75mm maintenance hole grade ring - 8 per bundle - 75 kgs ea. 50.90 ea
Maintenance
75mm maintenance hole Grade
grade ring Rings
c/w step - 8 per bundle - 75 kgs ea. 74.80 ea
50mm maintenance
150mm maintenance hole hole grade
grade ring
ring -- 150
12 per
kgsbundle
ea. - 52 kg ea. 47.90 ea
176.30 ea
75mm maintenance
300mm maintenance hole hole grade
grade ring
ring c/w
- 8 per
stepbundle
- 430 -kgs
75 ea.
kgs ea. 50.90 ea
225.80 ea
75mm maintenance
modutape (6.1 metreshole grade ring c/w step - 8 per bundle - 75 kgs ea.
per roll) 74.80 /roll
17.00 ea
150mm maintenance hole grade ring - 150 kgs ea. 176.30 ea
300mm maintenance hole grade ring c/w step - 430 kgs ea. 225.80 ea
modutape (6.1 metres per roll) 17.00 /roll

2020 Con Cast Pipe Price List - Page 13

2020 Con Cast Pipe Price List - Page 13

Maintenance Hole Estimate Sheet
1200 mm DIAMETER 1500 mm DIAMETER
MONOBASE MH MONOBASE MH
Maintenance
DEPTH (m) Hole Estimate
PRICE Sheet DEPTH (m) PRICE
1200
FROMDIAMETER
mm TO $ /ea 1500 mm DIAMETER
FROM TO $ /ea
MONOBASE
1.37 MH 1.52 2,172.00 MONOBASE
1.37 MH 1.67 4,116.00
DEPTH (m)1.68
1.53 PRICE
2,293.00 DEPTH (m)1.99
1.68 PRICE
4,482.00
FROM
1.69 TO
1.85 $ /ea
2,415.00 FROM
2.00 TO
2.30 $ /ea
4,846.00
1.37
1.86 1.52
2.01 2,172.00
2,535.00 1.37
2.31 1.67
2.62 4,116.00
5,213.00
1.53
2.02 1.68
2.17 2,293.00
2,655.00 1.68
2.63 1.99
2.93 4,482.00
5,578.00
1.69
2.18 1.85
2.33 2,415.00
2,518.00 2.00
2.94 2.30
3.25 4,846.00
5,944.00
1.86
2.34 2.01
2.50 2,535.00
2,641.00 2.31
3.26 2.62
3.56 5,213.00
6,440.00
2.02
2.51 2.17
2.66 2,655.00
2,761.00 2.63
3.57 2.93
3.88 5,578.00
6,681.00
2.18
2.67 2.33
2.82 2,518.00
2,881.00 2.94
3.89 3.25
4.19 5,944.00
6,922.00
2.34
2.83 2.50
2.98 2,641.00
3,002.00 3.26
4.20 3.56
4.51 6,440.00
7,028.00
2.51
2.99 2.66
3.15 2,761.00
3,123.00 3.57
4.52 3.88
4.82 6,681.00
7,148.00
2.67
3.16 2.82
3.31 2,881.00
3,243.00 3.89
4.83 4.19
4.99 6,922.00
7,268.00
2.83
3.32 2.98
3.47 3,002.00
3,366.00 4.20
5.00 4.51
5.30 7,028.00
8,956.00
2.99
3.48 3.15
3.63 3,123.00
3,485.00 4.52
5.31 4.82
5.62 7,148.00
9,198.00
3.16
3.64 3.31
3.80 3,243.00
3,606.00 4.83
5.63 4.99
5.93 7,268.00
9,439.00
3.32
3.81 3.47
3.96 3,366.00
3,725.00 5.00
5.94 5.30
6.25 8,956.00
9,680.00
3.48
3.97 3.63
4.12 3,485.00
3,847.00 5.31
6.26 5.62
6.56 9,198.00
9,922.00
3.64
4.13 3.80
4.28 3,606.00
4,088.00 5.63
6.57 5.93
6.88 9,439.00
10,163.00
3.81
4.29 3.96
4.45 3,725.00
4,210.00 5.94
6.89 6.25
7.19 9,680.00
10,405.00
3.97
4.46 4.12
4.61 3,847.00
4,330.00 6.26
7.20 6.56
7.51 9,922.00
10,645.00
4.13
4.62 4.28
4.77 4,088.00
4,451.00 6.57
7.52 6.88
7.82 10,163.00
10,886.00
4.29
4.78 4.45
4.99 4,210.00
4,571.00 6.89
7.83 7.19
8.14 10,405.00
11,128.00
4.46
5.00 4.61
5.15 4,330.00
6,257.00 7.20 7.51 10,645.00
4.62
5.16 4.77
5.31 4,451.00
6,499.00 7.52 7.82 10,886.00
4.78
5.32 4.99
5.48 4,571.00
6,621.00 7.83 8.14 11,128.00
5.00
5.49 5.15
5.64 6,257.00
6,742.00
5.16
5.65 5.31
5.80 6,499.00
6,862.00
5.32
5.81 5.48
5.96 6,621.00
6,982.00
5.49
5.97 5.64
6.13 6,742.00
7,104.00
5.65
6.14 5.80
6.29 6,862.00
7,223.00
5.81
6.30 5.96
6.45 6,982.00
7,343.00
5.97
6.46 6.13
6.61 7,104.00
7,344.00
6.14
6.62 6.29
6.78 7,223.00
7,464.00
6.30
6.79 6.45
6.94 7,343.00
7,587.00
6.46
6.95 6.61
7.10 7,344.00
7,706.00
6.62
7.11 6.78
7.26 7,464.00
7,948.00
6.79
7.27 6.94
7.43 7,587.00
8,069.00
6.95
7.44 7.10
7.59 7,706.00
8,187.00
7.11
7.60 7.26
7.75 7,948.00
8,309.00
7.27
7.76 7.43
7.91 8,069.00
8,431.00
7.44
7.92 7.59
8.08 8,187.00
8,551.00
7.60 7.75 8,309.00
7.76 7.91 8,431.00
7.92 8.08 8,551.00

2020 Con Cast Pipe Price List - Page 14

2020 Con Cast Pipe Price List - Page 14

Maintenance Hole Estimate Sheet
1800 mm DIAMETER 2400 mm DIAMETER 3000 mm DIAMETER
BASE SLAB MH BASE SLAB MH BASE SLAB MH
Maintenance
DEPTH (m) Hole PRICE
Estimate Sheet DEPTH (m) PRICE DEPTH (m) PRICE
FROM
1800 TO
mm DIAMETER $ /ea FROM
2400 TO
mm DIAMETER $ /ea FROM
3000 TO
mm DIAMETER $ /ea
1.37 SLAB MH
BASE 1.67 5,411.00 1.37 SLAB MH
BASE 1.67 10,304.00 1.37 SLAB MH1.67
BASE 16,907.00
1.68 DEPTH1.99
(m) PRICE
5,932.00 1.68 DEPTH1.99
(m) PRICE
11,232.00 1.68 DEPTH1.99
(m) PRICE
18,359.00
FROM
2.00 2.30TO $ /ea
6,451.00 FROM
2.00 2.30TO $ /ea
12,159.00 FROM
2.00 2.30TO $ /ea
19,810.00
2.311.37 2.621.67 5,411.00
6,972.00 2.311.37 2.621.67 10,304.00
13,087.00 2.311.37 2.621.67 16,907.00
21,261.00
2.631.68 2.931.99 5,932.00
7,490.00 2.631.68 2.931.99 11,232.00
14,012.00 2.631.68 2.931.99 18,359.00
22,707.00
2.942.00 3.252.30 6,451.00
8,012.00 2.942.00 3.252.30 12,159.00
14,874.00 2.942.00 3.252.30 19,810.00
23,569.00
3.262.31 3.562.62 6,972.00
7,832.00 3.262.31 3.562.62 13,087.00
15,114.00 3.262.31 3.562.62 21,261.00
23,810.00
3.572.63 3.882.93 7,490.00
8,073.00 3.572.63 3.882.93 14,012.00
15,354.00 3.572.63 3.882.93 22,707.00
23,930.00
3.892.94 4.193.25 8,012.00
8,315.00 3.892.94 4.193.25 14,874.00
15,513.00 3.892.94 4.193.25 23,569.00
24,036.00
4.203.26 4.513.56 7,832.00
8,420.00 4.203.26 4.513.56 15,114.00
15,582.00 4.203.26 4.513.56 23,810.00
24,277.00
4.523.57 4.823.88 8,073.00
8,542.00 4.523.57 4.823.88 15,354.00
15,822.00 4.523.57 4.823.88 23,930.00
24,518.00
4.833.89 4.994.19 8,315.00
8,782.00 4.833.89 4.994.19 15,513.00
15,929.00 4.833.89 4.994.19 24,036.00
24,654.00
5.004.20 5.304.51 8,420.00
10,688.00 5.004.20 5.304.51 15,582.00
17,968.00 5.004.20 5.304.51 24,277.00
26,583.00
5.314.52 5.624.82 8,542.00
10,913.00 5.314.52 5.624.82 15,822.00
17,991.00 5.314.52 5.624.82 24,518.00
26,606.00
5.634.83 5.934.99 8,782.00
11,156.00 5.634.83 5.934.99 15,929.00
18,196.00 5.634.83 5.934.99 24,654.00
26,809.00
5.945.00 6.255.30 10,688.00
11,396.00 5.945.00 6.255.30 17,968.00
18,437.00 5.945.00 6.255.30 26,583.00
27,052.00
6.265.31 6.565.62 10,913.00
11,638.00 6.265.31 6.565.62 17,991.00
18,677.00 6.265.31 6.565.62 26,606.00
27,292.00
6.575.63 6.885.93 11,156.00
11,878.00 6.575.63 6.885.93 18,196.00
18,920.00 6.575.63 6.885.93 26,809.00
27,534.00
6.895.94 7.196.25 11,396.00
12,120.00 6.895.94 7.196.25 18,437.00
19,161.00 6.895.94 7.196.25 27,052.00
27,775.00
7.206.26 7.516.56 11,638.00
12,360.00 7.206.26 7.516.56 18,677.00
19,403.00 7.206.26 7.516.56 27,292.00
28,016.00
7.526.57 7.826.88 11,878.00
12,603.00 7.526.57 7.826.88 18,920.00
19,643.00 7.526.57 7.826.88 27,534.00
28,257.00
7.836.89 8.147.19 12,120.00
12,845.00 7.836.89 8.147.19 19,161.00
19,884.00 7.836.89 8.147.19 27,775.00
28,498.00
NOTES:7.20 7.51 12,360.00 7.20 7.51 19,403.00 7.20 7.51 28,016.00
1) DEPTH REPRESENTS
7.52 7.82THE DIFFERENCE
12,603.00 FROM FINISHED GRADE TO LOWEST
7.52 INVERT. 19,643.00
7.82 7.52 7.82 28,257.00
7.83 8.14 12,845.00 7.83 8.14 19,884.00 7.83 8.14 28,498.00
2) PRICES
NOTES:SHOWN ARE BASED UPON THE MOST LIKELY COMBINATION OF PIECES FOR EACH
DEPTH RANGE
1) DEPTH - ACTUAL COMBINATIONS
REPRESENTS THE DIFFERENCEANDFROM
PRICES MAY VARY.
FINISHED GRADE TO LOWEST INVERT.

3) THE FOLLOWING
2) PRICES SHOWN DESIGN CRITERIA
ARE BASED HAVE
UPON THEBEEN
MOSTUSED:
LIKELY COMBINATION OF PIECES FOR EACH
- 1500mm & 1800mm
DEPTH RANGE MAINTENANCE
- ACTUAL HOLES HAVE
COMBINATIONS 2.13m OF
AND PRICES MAYHEADROOM
VARY. BEFORE TRANSITIONING.
- 2400mm & 3000mm MAINTENANCE HOLES HAVE 2.44m OF HEADROOM BEFORE TRANSITIONING.
- WHEREVER POSSIBLE,
3) THE FOLLOWING TAPER
DESIGN TOPS (CONES)
CRITERIA ARE USED
HAVE BEEN USED:INSTEAD OF FLAT CAPS.
- TYPICAL RANGE
- 1500mm FOR BRICK
& 1800mm & CASTING
MAINTENANCE IS 225-350mm.
HOLES HAVE 2.13m OF HEADROOM BEFORE TRANSITIONING.
- 2400mm & 3000mm MAINTENANCE HOLES HAVE 2.44m OF HEADROOM BEFORE TRANSITIONING.
4) PRICES INCLUDE:
- WHEREVER POSSIBLE, TAPER TOPS (CONES) ARE USED INSTEAD OF FLAT CAPS.
- PRECAST
- TYPICALMAINTENANCE HOLE &
RANGE FOR BRICK COMPONENTS
CASTING IS 225-350mm.
- GASKETS
- 1200 DIA. SAFETY
4) PRICES LANDINGS (FOR MAINTENANCE HOLES 5.0m & DEEPER)
INCLUDE:
- PRECAST MAINTENANCE HOLE COMPONENTS
5) PRICES DO NOT INCLUDE:
- GASKETS
- GRADE
- 1200 RINGS (ADJUSTMENT
DIA. SAFETY RINGS)
LANDINGS (FOR MAINTENANCE HOLES 5.0m & DEEPER)
- METAL FRAMES & GRATES
- PREBENCHING
5) PRICES DO NOT INCLUDE:
- FLEXIBLE
- GRADECONNECTORS (BOOTS)RINGS)
RINGS (ADJUSTMENT
- METAL FRAMES & GRATES
- PREBENCHING
- FLEXIBLE CONNECTORS (BOOTS)

2020 Con Cast Pipe Price List - Page 15

2020 Con Cast Pipe Price List - Page 15

Flexible Connectors
Pipe to maintenance hole connectors, supplied and installed.

CONCRETE PIPE PVC PIPE PRICE ($/ea.)

150 & 200 218.10

250 & 300 284.60
300 375 372.20
375 450 447.40
450 525 566.10
525 668.30
600 633.20
600 792.20
675 668.30
675 894.00
NOTE:
1) Please contact our Sales Department for larger sizes of flexible connectors.

Monobox Maintenance Holes

SIZE PRICE
(mm) $ /metre
2400 x 1800 4,647.10
3000 x 2400 7,451.50
3900 x 2400 10,515.30
3900 x 3000 13,549.20
NOTES:
1) For Monotransitions including a 1200mm diameter chimney, add $217.10 to the price of the pertinent size of Monocap.
2) A minimum charge of 2.0m will apply to all monobox maintenance holes
3) Monobox maintenance holes are designed to a maximum depth of 7.0 metres. Please contact your Con Cast Pipe Sales Representative if
the depth of the structure exceeeds 7.0m.
4) Above prices include the supply of butyl rubber joint sealer.

Utility Maintenance Holes & Valve Chambers

BASE SLAB RISER FLAT CAP
SIZE (mm)
PRICE MASS PRICE MASS PRICE MASS
$ /ea (kg/pc) $ /metre (kg/m) $ /ea (kg/pc)
1200 x 750 Chimney 1,744.10 1680
1200 x 1200 (200mm Wall) 1,390.10 1350 2,347.00 3080 1,390.10 1350
1800 x 1500 (200mm Wall) 2,112.20 2180 2,906.70 4000 2,112.20 2180
2400 x 1800 (200mm Wall) 2,950.00 3210 3,350.20 4920 2,950.00 3210
2400 x 2400 (200mm Wall) 4,297.30 4080 5,530.80 5530 4,297.30 4080
3000 x 2400 (250mm Wall) 5,204.20 6600 5,381.60 8020 5,204.20 6600
3000 x 3000 (250mm Wall) 7,088.60 9560 8,346.80 8790 7,088.60 9560
NOTES:
1) Above prices include allowance for two holes in riser walls. Additional holes are $215.40 each.
2) For transition slabs, please add $204.90 to the price of flat cap of the pertinent size.
3) Riser Heights: 0.914m to 2.44m.
5) Butyl Rubber joint filler is included in above pricing. Waterproofing is by others. Contact your Sales Representative for Waterproofing options.
6) Please contact the Con Cast Pipe Sales Department for pricing for Valve Chambers and Utility Maintenance Holes that have wall thickness greater
than specified above.

2020 Con Cast Pipe Price List - Page 16

Reinforced Concrete Catch Basins
APPROX.
SIZE HEIGHT MASS PRICE
Reinforced Concrete Catch Basins
(mm) (m) (kg/m) $ /metre
APPROX.
600 x 600 x 115 wall catchbasin SIZE 1.067 to 1.981
HEIGHT 940
MASS 518.50
PRICE
600 x 600 x 150 wall catchbasin (mm) 1.067 to(m)
1.981 (kg/m)
1220 $ /metre
700.90
600
600x x600
600x x150
115wall
wallditch inlet catchbasin
catchbasin 1.219 toto
1.067 1.981
1.981 1220
940 700.90
518.50
600
600x x1200
600 xx 150
150 wall
wall double ditch inlet catchbasin
catchbasin 1.219
1.067toto1.981
1.981 1785
1220 1,137.80
700.90
600
600x x840
600x x115
150wall
wallcurb inlet
ditch catchbasin
inlet catchbasin 1.219
1.219toto1.981
1.981 1060
1220 820.30
700.90
600x x1450
600 1200x x115
150wall
walltwin
double
inlet ditch inlet catchbasin
catchbasin 1.219toto1.981
1.219 1.981 1785
1640 1,137.80
1,006.20
NOTES:
600 x 840 x 115 wall curb inlet catchbasin 1.219 to 1.981 1060 820.30
1)600
ForxDitch
1450Inlet
x 115Catch Basins,
wall twin inletplease add $152.90/set for Ditch Inlet Fasteners as required.
catchbasin For grate pricing,
1.219 to 1.981 1640 see catchbasin
1,006.20
appurtenances section.
NOTES:
1) For Ditch Inlet Catch Basins, please add $152.90/set for Ditch Inlet Fasteners as required. For grate pricing, see catchbasin
Catchbasin Appurtenances
appurtenances section.
PRICE
DESCRIPTION
$
Catchbasin Appurtenances
catch basin frames & covers OPSD 400.020 716.00 ea
ditch inlet catch basin gratings - type "A" (fits 600 xDESCRIPTION
600 Ditch Inlet CB) PRICEea
617.00
ditch inlet catch basin gratings - type "B" (fits 600 x 1200 Ditch Inlet CB) $ ea
908.00
catch
ditch basin
inlet frames
catch basin&gratings
covers OPSD 400.020
- type "C" (fits 600 x 1200 Ditch Inlet CB) 997.00 eaea
716.00
ditch inlet catch basin
ditch inlet grate fasteners gratings - type "A" (fits 600 x 600 Ditch Inlet CB) 617.00 /set
158.90 ea
ditch inlet catch basin gratings - type "B" (fits 600 x 1200 Ditch Inlet CB) 908.00 ea
point of entry trap or goss trap with plug 724.00 ea
ditch inlet catch basin gratings - type "C" (fits 600 x 1200 Ditch Inlet CB) 997.00 ea
point of entry trap filter 69.30 ea
ditch inlet grate fasteners 158.90 /set
catch basin inlet control devices (inserts installed only) 140.70 /set
point of entry trap or goss trap with plug 724.00 ea
swift lift lifting eyes (4 tonne capacity) 428.60 ea.
point of entry trap filter 69.30 ea
catch basin inlet control devices (inserts installed only) 140.70 /set
Catchbasin
swift lift lifting eyesGrade Rings
(4 tonne capacity) 428.60 ea.
50mm catch basin grade ring - 12 per bundle - 36 kgs ea. 45.50 ea
75mm catch basin grade ring - 8 per bundle - 75 kgs ea. 48.10 ea
Catchbasin Grade Rings
125mm catch basin grade ring - 105 kgs ea. 72.20 ea
50mm
150mm catch catch basin
basin grade
grade ring
ring -- 125
12 per
kgsbundle
ea. - 36 kgs ea. 45.50 eaea
161.30
300mm catch basin grade ring - 245 kgs ea. - 75 kgs ea.
75mm catch basin grade ring - 8 per bundle 48.10 eaea
214.50
125mm catch
modutape basin grade
(6.1 metres ring - 105 kgs ea.
per roll) 72.20 /roll
17.00 ea
150mm catch basin grade ring - 125 kgs ea. 161.30 ea
300mm catch basin grade ring - 245 kgs ea. 214.50 ea
modutape (6.1 metres per roll) 17.00 /roll

2020 Con Cast Pipe Price List - Page 17

2020 Con Cast Pipe Price List - Page 17

Catch Basin Estimate Sheet

Catch
600 x 600 SINGLE Basin
INLET Estimate Sheet
600 x 600 SINGLE INLET 600 x 1450 TWIN INLET
115 WALL THICKNESS 150 WALL THICKNESS 115 WALL THICKNESS
HEIGHT PRICE
600 x 600 SINGLE INLET HEIGHT PRICEINLET
600 x 600 SINGLE HEIGHT PRICE
600 x 1450 TWIN INLET
(m) WALL THICKNESS
115 $ /ea (m) WALL THICKNESS
150 $ /ea (m)WALL THICKNESS
115 $ /ea
0.914HEIGHT 473.90 PRICE 0.914
HEIGHT 640.60 PRICE 0.914
HEIGHT 919.70 PRICE
1.067 (m) 553.20$ /ea 1.067 (m) 747.90$ /ea 1.067(m) 1,073.70
$ /ea
1.219 0.914 632.10473.90 1.2190.914 854.40
640.60 1.219
0.914 1,226.60
919.70
1.372 1.067 711.40553.20 1.3721.067 961.60
747.90 1.372
1.067 1,380.50
1,073.70
1.524 1.219 790.20632.10 1.5241.219 1,068.20854.40 1.524
1.219 1,533.40
1,226.60
1.676 1.372 869.00711.40 1.6761.372 1,174.70961.60 1.676
1.372 1,686.40
1,380.50
1.829 1.524 948.30790.20 1.8291.524 1,281.90
1,068.20 1.524
1.829 1,533.40
1,840.30
1.981 1.676 1,027.10 869.00 1.9811.676 1,388.50
1,174.70 1.981
1.676 1,993.30
1,686.40
2.134 1.829 1,106.50 948.30 2.1341.829 1,495.70
1,281.90 2.134
1.829 2,147.20
1,840.30
2.287 1.981 1,185.801,027.10 2.2871.981 1,603.00
1,388.50 1.981
2.287 1,993.30
2,301.20
2.439 2.134 1,264.601,106.50 2.4392.134 1,709.50
1,495.70 2.134
2.439 2,147.20
2,454.10
2.592 2.287 1,344.001,185.80 2.5922.287 1,816.70
1,603.00 2.287
2.592 2,301.20
2,608.10
2.744 2.439 1,422.801,264.60 2.7442.439 1,923.30
1,709.50 2.439
2.744 2,454.10
2,761.00
2.897 2.592 1,502.101,344.00 2.8972.592 2,030.50
1,816.70 2.592
2.897 2,608.10
2,915.00
3.049 2.744 1,580.901,422.80 3.0492.744 2,137.00
1,923.30 2.744
3.049 2,761.00
3,067.90
3.202 2.897 1,660.201,502.10 3.2022.897 2,244.30
2,030.50 2.897
3.202 2,915.00
3,221.90
3.354 3.049 1,739.001,580.90 3.3543.049 2,350.80
2,137.00 3.049
3.354 3,067.90
3,374.80
3.507 3.202 1,818.401,660.20 3.5073.202 2,458.10
2,244.30 3.202
3.507 3,221.90
3,528.70
3.659 3.354 1,739.00
1,897.20 3.6593.354 2,350.80
2,564.60 3.354
3.659 3,374.80
3,681.70
3.812 3.507 1,976.501,818.40 3.8123.507 2,671.80
2,458.10 3.507
3.812 3,528.70
3,835.60
3.659 1,897.20 3.659 2,564.60 3.659 3,681.70
3.812 INLET 1,976.50
600 x 600 DITCH 3.812
600 x 1200 2,671.80
DITCH INLET 3.812
600 x 840 3,835.60
CURB INLET
150 WALL THICKNESS 150 WALL THICKNESS 115 WALL THICKNESS
600 x 600 DITCH INLET 600 x 1200 DITCH INLET 600 x 840 CURB INLET
HEIGHT PRICE HEIGHT PRICE HEIGHT PRICE
150 WALL THICKNESS 150 WALL THICKNESS 115 WALL THICKNESS
(m) $ /ea (m) $ /ea (m) $ /ea
HEIGHT PRICE HEIGHT PRICE HEIGHT PRICE
0.914 640.60 0.914 1,039.90 0.914 749.80
(m) $ /ea (m) $ /ea (m) $ /ea
1.067 747.90 1.067 1,214.00 1.067 875.30
0.914 640.60 0.914 1,039.90 0.914 749.80
1.219 854.40 1.219 1,387.00 1.219 999.90
1.067 747.90 1.067 1,214.00 1.067 875.30
1.372 961.60 1.372 1,561.10 1.372 1,125.50
1.219 854.40 1.219 1,387.00 1.219 999.90
1.524 1,068.20 1.524 1,734.00 1.524 1,250.10
1.372 961.60 1.372 1,561.10 1.372 1,125.50
1.676 1,174.70 1.676 1,907.00 1.676 1,374.80
1.524 1,068.20 1.524 1,734.00 1.524 1,250.10
1.829 1,281.90 1.829 2,081.00 1.829 1,500.30
1.676 1,174.70 1.676 1,907.00 1.676 1,374.80
1.981 1.829 1,388.501,281.90 1.9811.829 2,254.00
2,081.00 1.981
1.829 1,625.00
1,500.30
2.134 1.981 1,495.701,388.50 2.1341.981 2,428.10
2,254.00 2.134
1.981 1,750.50
1,625.00
2.287 2.134 1,603.001,495.70 2.2872.134 2,602.10
2,428.10 2.287
2.134 1,876.00
1,750.50
2.439 2.287 1,709.501,603.00 2.4392.287 2,775.10
2,602.10 2.439
2.287 2,000.70
1,876.00
2.592 2.439 1,816.701,709.50 2.5922.439 2,949.20
2,775.10 2.592
2.439 2,126.20
2,000.70
2.744 2.592 1,923.301,816.70 2.7442.592 3,122.10
2,949.20 2.744
2.592 2,250.90
2,126.20
2.897 2.744 2,030.501,923.30 2.8972.744 3,296.20
3,122.10 2.897
2.744 2,376.40
2,250.90
3.049 2.897 2,137.002,030.50 3.0492.897 3,469.20
3,296.20 3.049
2.897 2,501.10
2,376.40
3.202 3.049 2,244.302,137.00 3.2023.049 3,643.20
3,469.20 3.202
3.049 2,626.60
2,501.10
3.354 3.202 2,350.802,244.30 3.3543.202 3,816.20
3,643.20 3.354
3.202 2,751.30
2,626.60
3.507 3.354 2,458.102,350.80 3.5073.354 3,990.30
3,816.20 3.507
3.354 2,876.80
2,751.30
3.659 3.507 2,564.602,458.10 3.6593.507 4,163.20
3,990.30 3.659
3.507 3,001.50
2,876.80
3.812 3.659 2,671.802,564.60 3.8123.659 4,337.30
4,163.20 3.812
3.659 3,127.00
3,001.50
3.812 2,671.80 3.812 4,337.30 3.812 3,127.00

NOTES:
NOTES:INDICATE TOTAL PRECAST HEIGHT INCLUDING MONOLITHIC BASE.
1) HEIGHTS
1) HEIGHTS
2) PRICES DO NOTINDICATE
INCLUDE:TOTAL PRECAST HEIGHT
ADJUSTMENT INCLUDING
RINGS, METAL MONOLITHIC
FRAMES, GRATESBASE.
& FASTENERS,
2) PRICES
GOSS TRAPS, DO NOT INCLUDE:
& INLET CONTROL ADJUSTMENT
HARDWARE. RINGS, METAL FRAMES, GRATES & FASTENERS,
GOSS TRAPS, & INLET CONTROL HARDWARE.

2020 Con Cast Pipe Price List - Page 18

2020 Con Cast Pipe Price List - Page 18
Concrete Headwalls
Pipe Diameter OPSD 804.030 Headwall OPSD 804.040 Headwall Grate Handrail
300 $3,308.50 $812.50
375
Concrete Headwalls $3,308.50 $812.50
450 $4,021.20 $894.90
Pipe Diameter OPSD 804.030 Headwall OPSD 804.040 Headwall Grate Handrail
525 $4,021.20 $894.90
300 $3,308.50 $812.50
600 $5,135.10 $15,518.70 $923.90 $3,465.00
375 $3,308.50 $812.50
675 $5,135.10 $15,518.70 $923.90 $3,465.00
450 $4,021.20 $894.90
750 $6,271.50 $15,518.70 $1,095.00 $3,465.00
525 $4,021.20 $894.90
825 $6,271.50 $15,518.70 $1,095.00 $3,465.00
600 $5,135.10 $15,518.70 $923.90 $3,465.00
900 $7,418.50 $17,382.00 $1,273.60 $3,590.40
675 $5,135.10 $15,518.70 $923.90 $3,465.00
975 $17,382.00 $1,331.60 $3,590.40
750 $6,271.50 $15,518.70 $1,095.00 $3,465.00
1050 $17,382.00 $1,379.70 $3,590.40
825 $6,271.50 $15,518.70 $1,095.00 $3,465.00
1200 $17,382.00 $1,485.90 $3,590.40
900 $7,418.50 $17,382.00 $1,273.60 $3,590.40
1350 $19,687.20 $2,016.40 $3,841.00
975 $17,382.00 $1,331.60 $3,590.40
1500 $21,008.90 $2,228.70 $3,841.00
1050 $17,382.00 $1,379.70 $3,590.40
1650 $21,008.90 $2,653.30 $3,841.00
1200 $17,382.00 $1,485.90 $3,590.40
1800 $21,008.90 $3,077.60 $3,841.00
1350 $19,687.20 $2,016.40 $3,841.00
2400 $24,451.80 $4,523.60 $3,841.00
1500 $21,008.90 $2,228.70 $3,841.00
NOTES:
1) Headwalls as1650
per OPSD 804.030 Modified and OPSD 804.040 Modified. $21,008.90 $2,653.30 $3,841.00
2) Grates as per1800
OPSD 804.05. $21,008.90 $3,077.60 $3,841.00
2400
3) Custom finishes available on request. Additional pricing will be applied based on$24,451.80
finish requirements. $4,523.60 $3,841.00
NOTES:
4) OPSD 804.040 Modified headwalls are multiple piece systems for easy and safe handling. See shop drawings for piece masses.
1) Headwalls
5) On-site as per
assembly OPSD
is the 804.030 Modified
responsibility and OPSD 804.040 Modified.
of the contractor.
2) Grates as per OPSD 804.05.
3) Custom finishes available on request. Additional pricing will be applied based on finish requirements.
4) OPSD 804.040 Modified headwalls are multiple piece systems for easy and safe handling. See shop drawings for piece masses.
5) On-site assembly is the responsibility of the contractor.

2020 Con Cast Pipe Price List - Page 19

2020 Con Cast Pipe Price List - Page 19

CON/SPAN Culvert & Bridge
Replacement
CON/SPAN System& Bridge
Culvert
Replacement
SHORT SPAN SERIESSystem
SPAN x RISE SPAN x RISE MASS
SHORT SPAN (m)SERIES (ft) (tonnes /metre)
3.66 xx1.22
SPAN RISE 12 x 4x RISE
SPAN 3.1 MASS
3.66 x 1.52 12 x 5 3.4
(m) (ft) (tonnes /metre)
3.66 x 1.83 12 x 6 3.7
3.66 x 1.22 12 x 4 3.1
3.66 x 2.13 12 x 7 4.0
3.66 x 1.52 12 x 5 3.4
3.66 x 2.44 12 x 8 4.3
3.66 x 1.83
3.66 x 2.74 12
12 x 9 x 6 4.6 3.7
3.66
3.66 xx 3.05
2.13 12 x1210x 7 4.9 4.0
3.66
4.27 xx 1.22
2.44 14 12
x 4x 8 3.5 4.3
3.66 2.74
4.27 x 1.52 14 12
x 5x 9 3.8 4.6
4.27 x 1.83
3.66 3.05 1412
x 6x 10 4.1 4.9
4.27 xx 2.13
4.27 1.22 14 14
x 7x 4 4.4 3.5
4.27 xx 2.44
4.27 1.52 14 14
x 8x 5 4.7 3.8
4.27 x 2.74 14 x 9 5.0
4.27 x 1.83 14 x 6 4.1
4.27 x 3.05 14 x 10 5.3
4.27 x 2.13 14 x 7 4.4
4.27 x 2.44 14 x 8 4.7
STANDARD UNIT LAY LENGTH IS 2.44 m; UNIT MASSES ARE APPROXIMATE.
4.27 x 2.74 14 x 9 5.0
4.27 x 3.05 14 x 10 5.3
INTERMEDIATE SPAN SERIES
STANDARD
SPANUNIT LAY LENGTH IS
x RISE 2.44x m;
SPAN UNIT MASSES ARE
RISE APPROXIMATE.
MASS
(m) (ft) (tonnes /metre)
4.88 x 1.52 16 x 5 5.3
4.88 x 1.83 16 x 6 5.7
INTERMEDIATE SPAN SERIES
4.88 x 2.13 16 x 7 6.1
SPAN x RISE SPAN x RISE MASS
4.88 x 2.44 16 x 8 6.5
(m)
4.88 x 2.74 16 x 9
(ft) (tonnes
6.9
/metre)
4.88
6.10 xx 1.52
1.52 20 16
x 5x 5 5.7 5.3
4.88
6.10 xx 1.83
1.83 20 16
x 6x 6 6.1 5.7
4.88
6.10 xx 2.13
2.13 20 16
x 7x 7 6.5 6.1
4.88 2.44
6.10 x 2.44 20 16
x 8x 8 6.9 6.5
6.10 xx 2.74
4.88 2.74 20 16
x 9x 9 7.3 6.9
6.10 xx 3.05
6.10 1.52 20 x2010x 5 7.7 5.7
7.32 xx 1.52
6.10 1.83 24 20
x 5x 6 6.3 6.1
7.32 x 1.83 24 x 6 6.7
6.10 x 2.13 20 x 7 6.5
7.32 x 2.13 24 x 7 7.1
6.10 x 2.44 20 x 8 6.9
7.32 x 2.44 24 x 8 7.5
6.10
7.32 xx 2.74
2.74 24 20
x 9x 9 7.9 7.3
6.10 x 3.05
7.32 x 3.05 24 x 10x 10
20 8.3 7.7
7.32 x 1.52 24 x 5 6.3
7.32UNIT
STANDARD x 1.83
LAY LENGTH IS 2.44 m;24 x 6 MASSES ARE APPROXIMATE.
UNIT 6.7
7.32 x 2.13 24 x 7 7.1
7.32 x 2.44 24 x 8 7.5
7.32 x 2.74 24 x 9 7.9
7.32 x 3.05 24 x 10 8.3

STANDARD UNIT LAY LENGTH IS 2.44 m; UNIT MASSES ARE APPROXIMATE.

2020 Con Cast Pipe Price List - Page 20

CON/SPAN Culvert & Bridge
Replacement
CON/SPANSystem
Culvert & Bridge
Replacement
LONG SPAN SERIES System
SPAN x RISE SPAN x RISE MASS
LONG SPAN
(m) SERIES (ft) (tonnes /metre)
8.54SPAN
x 2.44x RISE SPAN
28 x 8 x RISE 11.4MASS
(m)
8.54 x 2.74 28 x 9 (ft) (tonnes
11.9 /metre)
8.54 x8.54
3.05x 2.44 28 x 1028 x 8 12.4 11.4
8.54 x8.54
3.35x 2.74 28 x 1128 x 9 12.9 11.9
9.76 x8.54
2.44x 3.05 32 x 288 x 10 12.0 12.4
9.76 x8.54
2.74x 3.35 32 x 289 x 11 12.5 12.9
9.76 x9.76
3.05x 2.44 32 x 1032 x 8 13.0 12.0
9.76 x9.76
3.35x 2.74 32 x 1132 x 9 13.5 12.5
9.76 x9.76
3.66x 3.05 32 x 10
32 x 12 14.0 13.0
10.98 9.76
x 2.44x 3.35 36 x 328 x 11 12.5 13.5
10.98 9.76
x 2.74x 3.66 36 x 329 x 12 13.0 14.0
10.9810.98
x 3.05x 2.44 36 x 1036 x 8 13.5 12.5
10.9810.98
x 3.35x 2.74 36 x 1136 x 9 14.0 13.0
10.9810.98
x 3.66x 3.05 36 x 10
36 x 12 14.5 13.5
10.9810.98
x 3.97x 3.35 36 x 11
36 x 13 15.0 14.0
10.98 x 3.66 36 x 12 14.5
STANDARD 10.98
UNIT LAYx 3.97
LENGTH IS 1.68 m OR36 x1.83
13 m; UNIT MASSES ARE 15.0APPROXIMATE.

STANDARD UNIT LAY LENGTH IS 1.68 m OR 1.83 m; UNIT MASSES ARE APPROXIMATE.
SUPER SPAN SERIES
SPAN x RISE SPAN x RISE MASS
SUPER(m) SPAN SERIES (ft) (tonnes /metre)
SPAN
12.81 x RISE
x 2.44 SPAN
42 x 8 x RISE 13.7MASS
(m)
12.81 x 2.74 42 x 9 (ft) (tonnes
14.2 /metre)
12.8112.81
x 3.05x 2.44 42 x 1042 x 8 14.8 13.7
12.8112.81
x 3.35x 2.74 42 x 1142 x 9 15.3 14.2
12.8112.81
x 3.66x 3.05 42 x 10
42 x 12 15.8 14.8
14.6412.81
x 3.05x 3.35 42 x 11
48 x 10 16.2 15.3
14.6412.81
x 3.35x 3.66 42 x 12
48 x 11 16.8 15.8
14.6414.64
x 3.66x 3.05 48 x 10
48 x 12 17.4 16.2
14.6414.64
x 3.97x 3.35 48 x 11
48 x 13 18.0 16.8
14.64 x 3.66 48 x 12 17.4
STANDARD 14.64 x 3.97
UNIT LAY LENGTH IS 1.68 m OR48 x1.83
13 m; UNIT MASSES ARE 18.0APPROXIMATE.

STANDARD UNIT LAY LENGTH IS 1.68 m OR 1.83 m; UNIT MASSES ARE APPROXIMATE.
NOTES:
1) Please contact a Con Cast Pipe Sales Representative for budget pricing
or toNOTES:
receive a detailed marketing package including our CON/SPAN Engineering Guide.
1) Please contact a Con Cast Pipe Sales Representative for budget pricing
2) Anyortechnical
to receive a detailed
concerns marketing
or unique packageconsiderations
application including our CON/SPAN
should be Engineering Guide.
directed to the Con Cast Pipe Sales Department at 800-668-PIPE (7473).
2) Any technical concerns or unique application considerations should be
directed to the Con Cast Pipe Sales Department at 800-668-PIPE (7473).

2020 Con Cast Pipe Price List - Page 21

2020 Con Cast Pipe Price List - Page 21

Specialty Precast Notes and Disclaimers
1 Quoted precast box, TriSpan, and chamber units
Specialty will be designed
Precast Notesasand per CSA S6 (CHBDC).
Disclaimers
2 Quoted box, TriSpan, and chamber units will be manufactured as per OPSS 1821 or CSA A23.4.
31 Precast
Quoted cut-off
precastwalls,
box, wingwalls,
TriSpan, and andchamber
headwalls willwill
units bebe manufactured
designed asas per
per CSA
CSA S6A23.4.
(CHBDC).
42 Box and box,
Quoted TriSpan units to
TriSpan, and bechamber
installedunits as per willContract Documents
be manufactured asorperOPSS
OPSS 422.
1821 or CSA A23.4.
53 Box unit, cut-off
Precast chambers, walls, and TriSpan and
wingwalls, unitsheadwalls
include jointing
will bematerial
manufactured of butylasrubber
per CSA andA23.4.
filter fabric . This should not be
considered a watertight joint solution. Waterproofing
4 Box and TriSpan units to be installed as per Contract Documents or OPSS 422. of the box, chamber, or TriSpan units are the responsibility of the
5 contractor. For technical
Box unit, chambers, andsupport
TriSpanand unitsalternative waterproofing
include jointing materialoptions,
of butyl please
rubber contact
and filteryour
fabricSales Representative.
. This should not be
6 Responsibility of contractor to obtain approvals for use of the quoted precast alternatives
considered a watertight joint solution. Waterproofing of the box, chamber, or TriSpan units are the responsibility to the specified cast-in-place
of the
structure.
contractor. For technical support and alternative waterproofing options, please contact your Sales Representative.
76 Contractor
Responsibilityresponsible for supply
of contractor to obtain and approvals
installationfor of use
all miscellaneous
of the quoted precast metals, alternatives
frame and covers, ladders, etc.
to the specified unless
cast-in-place
otherwise
structure. sepcified on quotation.
87 Contractor
Contractorresponsible
responsiblefor forcoring
supplyvalve stem openings
and installation of allinto flat caps. metals, frame and covers, ladders, etc. unless
miscellaneous
9 Contractor responsible for
otherwise sepcified on quotation. design and construction of C.I.P. thrust blocks or thrust walls.
8 All
10 box unit and
Contractor chamberfor
responsible sections are supplied
coring valve with bellinto
stem openings andflat spigot
caps. joints. TriSpan units are quoted with flush end joints (butt
9 joints). If a shear
Contractor joint connection
responsible for designisand required, the contractor
construction of C.I.P.isthrustresponsible
blocks or forthrust
the supply
walls.and installation of any structural
connection plates and fasteners to achieve the shear reinforcing
10 All box unit and chamber sections are supplied with bell and spigot joints. TriSpan units strength required as perare CHBDC
quotedCAN/CSA
with flushS6. end joints (butt
11 Construction review, structural adequacy, excavation requirements, dewatering,
joints). If a shear joint connection is required, the contractor is responsible for the supply and installation handling equipment, andof soil
anystability is the
structural
responsibility
connection platesof theand contractor.
fasteners Backfill and compaction
to achieve are to be constructed
the shear reinforcing as peras
strength required theperOwners
CHBDC requirements.
CAN/CSA S6.
12 Any design, construction, and inspection of any poured in place structures are the responsibility of the contractor.
11 Construction review, structural adequacy, excavation requirements, dewatering, handling equipment, and soil stability is the
13 Details and size of hole openings in precast structures to be approved by contractor based on shop drawings supplied by
responsibility of the contractor. Backfill and compaction are to be constructed as per the Owners requirements.
12 Con
Any Cast
design,Pipe.construction, and inspection of any poured in place structures are the responsibility of the contractor.
14 Final quotation will be based on siting, structural design, and shop drawing approval.
13 Details and size of hole openings in precast structures to be approved by contractor based on shop drawings supplied by
15 Delivery date of the quoted precast units will be subject to receipt of purchase order and approved shop drawings.
Con Cast Pipe.
14 Contractor
16 is responsible
Final quotation will be based for cutting andstructural
on siting, removal of any temporary
design, and shophandlingdrawing beams on site. The temporary handling beam
approval.
should not be removed until the structure is installed in to its final location.
15 Delivery date of the quoted precast units will be subject to receipt of purchase order and approved shop drawings.
Contractor
16 Quoted
17 is responsible
pricing for FREIGHT for iscutting
a NETand removal
price. Tradeofdiscounts
any temporary do nothandling
apply tobeams
Freighton site. The temporary handling beam
Costs.
should prices
18 Quoted not be are
removed
for theuntil
supplythe and
structure
deliveryis installed
of precast in to its finalunits
concrete location.
F.O.B. (freight on board) truck at jobsite. Off-loading
17 and installation
Quoted pricing isforbyFREIGHT
others. The is a price
NET includes
price. Tradeone (1) hour ofdo
discounts truck
notwaiting
apply totime for each
Freight Costs. truckload delivery. Additional
waiting time will be added to invoices at $75.00 per hour.
18 Quoted prices are for the supply and delivery of precast concrete units F.O.B. (freight on board) truck at jobsite. Off-loading
19 For
andallinstallation
products with is byan outside
others. The dimension greater
price includes than
one (1)3.85m
hour of (ortruck
3.7mwaiting
if being shipped
time for each to the City of delivery.
truckload Toronto) on the
Additional
shortest wall, will
waiting time please allow 6tobusiness
be added invoices days for Con
at $75.00 perCast
hour.Pipe to obtain the appropriate oversize load permits prior to the
19 delivery requirements
For all products with anforoutside
the product.dimensionThese permits
greater thancan3.85m
take up (orto3.7m
14 business days depending
if being shipped to the City onofMinistry
Toronto) of on the
Transportation and Municipal permit application approval. Please contact your
shortest wall, please allow 6 business days for Con Cast Pipe to obtain the appropriate oversize load permits prior Sales Representative for further information.
to the
delivery requirements for the product. These permits can take up to 14 business days depending on Ministry of
20 ItTransportation
is the responsibility of the contractor
and Municipal to rotate the
permit application units on Please
approval. site to the "installed"
contact position
your Sales if they are being
Representative shipped
for further in the
information.
opposite orientation due to shipping constraints.
20 IfItan
21 engineered
is the stamped
responsibility setcontractor
of the of shop drawings
to rotate are
the required, please
units on site allow
to the an engineering
"installed" position ifsurcharge of $850.00
they are being for in
shipped each
the
product
opposite requiring a stamped
orientation shop drawing.
due to shipping constraints.
If an$75.70
21 Add
22 engineered stamped
for each set of set of shop
threaded drawings
dowels and are required,
inserts, pleasefor
if required, allow
the an engineering
construction surcharge
of any of $850.00
cast-in-place for each
structures.
product requiring a stamped shop drawing.
23 Quoted products include the use of concrete exposure class C1 and reinforcing bars as per CAN/CSA G30.18, Grade
22 400W. If any for
Add $75.70 other
eachtypesetofofconcrete,
threadedreinforcing
dowels and bars or reinforcing
inserts, if required,labour
for the(i.e. tying of reinforcement
construction bar) are required
of any cast-in-place for the
structures.
23 precast
Quotedconcrete
productsproduct
include quoted,
the use Con Cast Pipe
of concrete reserves
exposure the C1
class right
andto reinforcing
requote thebars product.
as perAllCAN/CSA
reinforcing steel inGrade
G30.18, the
quotation
400W. If anyonlyother
covers welded
type steel only
of concrete, unless otherwise
reinforcing detailed on
bars or reinforcing the quotation.
labour (i.e. tying of reinforcement bar) are required for the
24 Shop drawings for specialty precast items will take 2-3 weeks
precast concrete product quoted, Con Cast Pipe reserves the right to requote from receipt of order.
the product. All reinforcing steel in the
25 Con Cast Pipe does not warranty products specified with ConShield
quotation only covers welded steel only unless otherwise detailed on the quotation. admixture.
24 Precast
26 concretefor
Shop drawings products
specialty quoted willitems
precast be cured until2-3
will take a minimum
weeks from strength
receiptof of
25order.
MPa is achieved in accordance with OPSS
25 1821.07.03.
Con Cast Pipe No does
extended or wet curing
not warranty productsoperations arewith
specified included unless
ConShield otherwise stated on the quotation. Con Cast Pipe
admixture.
26 reserves the right to
Precast concrete requotequoted
products the product
will beif cured
extendeduntilor wet curingstrength
a minimum is required.
of 25 MPa is achieved in accordance with OPSS
27 Unit prices are firm but sizes, quantities, and classifications
1821.07.03. No extended or wet curing operations are included unless are the responsibility
otherwiseofstated
the contractor to verify Con
on the quotation. for accuracy.
Cast Pipe
28 Prices are quoted excluding sales tax.
reserves the right to requote the product if extended or wet curing is required.
27 Unit prices are firm but sizes, quantities, and classifications are the responsibility of the contractor to verify for accuracy.
28 Prices are quoted excluding sales tax.

2020 Con Cast Pipe Price List - Page 22

2020 Con Cast Pipe Price List - Page 22

299 Brock Road South
Puslich, Ontario N0B 2J0
800.668.PIPE
concastpipe.com